^{CARRARO AXLE, TRANSMISSION AND DIFFERENTIAL PARTS FOR BACKHOE LOADERS}

Mahmut Usta Yedek Parca supplies Carraro axle, transmission and differential parts for construction machines working under continuous load and shock. Carraro axles and transmissions are fitted to backhoe loaders, wheel loaders and telehandlers, so parts are identified by the axle number on the unit plate and the Carraro part number rather than by the machine brand.

^{Ordering by axle number}

Every part is defined by the axle model and its original number. Carraro axles carry their own plate with a model designation and serial number, for example 20.19, 26.16, 28.16 or 28.25. Sending that designation together with the machine model is enough for accurate selection. The same backhoe loader model was built with different axle variants over its production years, so the machine model alone is usually not enough.

^{Front and rear axles}

The range covers axle housings, beams, swivel housings, king pins, flanges, hubs, brake discs and calipers, together with complete axle assemblies. The front axle on a backhoe loader takes repeated shock loading during digging and loading cycles, so swivel and balance beam components are treated as wear items.

^{Differentials and crown wheel and pinion sets}

Crown wheel and pinion sets, differential bevel gears, side gears, differential cases, spider gears, differential crosses, limited slip and locking differential components and shim kits are supplied by part number. Crown wheel and pinion sets are selected by ratio, which is stamped on the gear itself.

^{Planetary systems and wheel hub kits}

Planetary carrier assemblies, planetary gears, sun gears, ring gears, carrier hubs, wheel hub kits, hub studs and nuts are supplied for wheel end and axle applications. Planetary designs spread load across several gear meshes, which is what keeps the wheel end alive in demanding duty cycles.

^{Shafts, half shafts and drive line}

Half shafts, input and main shafts, splined couplings, drive shafts, yokes, drive shaft flanges and universal joints are supplied by part number.

^{Transmission gears and components}

Transmission gears, bevel and worm gears, synchronizers, selectors, housings and covers, transmission pumps and transmission oil filters are supplied for Carraro transmissions. Correct gear geometry and tight tolerances keep noise down, improve shift response and prevent premature wear.

^{Bearings, seals and repair kits}

Axle and reduction unit bearings, oil seals, sealing rings, O-rings, thrust washers, bushings and complete axle repair kits are supplied for scheduled service and full overhaul. Seals and bearings are supplied together as kits, because replacing one without the other on a stripped axle is a false economy.

^{Machine compatibility}

Carraro axles and transmissions are fitted to backhoe loaders and loaders from JCB, Terex, Case, New Holland, Hidromek, Volvo and Caterpillar. Parts are cross referenced against the axle number and the original Carraro part number.

^{Application areas}

Carraro drivetrain components are used in backhoe loaders, wheel loaders, telehandlers, skid steer loaders and other construction machines operating under continuous shock loading.